Alpermann + Velte Time Code und Ancillary Data Systeme, products: Power Supply PT


products		Power Supply PT for RUB-H3

Manual:
pdf-file.... zip- file

Leaflet:
pdf-file.... zip- file


	H3-Modul

RUBIDIUM Power Suplly PT:

When working with electronics, you always need one basic thing, power. „Focus on essentials“ is the motto of this power supply series. The Alpermann +Velte RUBIDIUM SERIES power supply modules are great for powering all kind of different applications. The RUBIDIUM Power supply modules are available in four version, the internal built in RUBIDIUM modules PS, PT with 3HE (designed for use with our H3 housing) and PQ can power up to twelve modules at a time and offer failproof operation, when more than one module is inserted into a RLC connected system. All modules are universally implementable (110 V to 250 V) and have a built in overload protection. PE is useful for S1 and T1 housings.

Temperature and the power outputs can be monitored via an internal interface. Each module in the frame with an microprocessor on board (all RUBIDIUM generators and inserters) can decode the power supply information and is able to send the information via TC_link to the status monitor or to the IE module to allow SNMP functions.

	Power Supply Features PT 60 Watts Power 110V - 250V universal compatible Overload protection Additional protection Universal IEC locking inlet Failure relay „Hot swapping“ compatible 2-pole ON/OFF switch 2-pole-fuse-holder Interface for voltage and temperature control via status monitor or via IE - module with SNMP control

TC_link is an Alpermann + Velte standard protocol for data transfer via a modified RS 485 interface.

Input RUBIDIUM Power supplies PT specifications

Inlet socket

According to IEC/EN 60320-1/C14, protection class1

Line voltage range

90-132 / 180-264 VAC, auto-ranging

Power line frequencey

47-63 Hz

Input current

800 mA maximum at 90 VAC

Efficiency

83% at full load, 25°C, 230 VAC, after 5 min. warm up

Line regulation

+/- 0,5 %

Output RUBIDIUM Power supplies PT

Output voltage / current

23.7 VDC ± 5%/1.05 A minimum, 2,5 A maximum

Turn-on delay

4 secs maximum

Ripple + Noise

240mV maximum

Load regulation

± 1% maximum

Overload protection

Typically at 130% of max. current, automatic recovery

Temperature coefficient

2,4 mV/°C

Hold-up time at 100% load

10ms

Miscellaneous PT

Weight PT

0.5 kg

Dimensions mechanical (circuit board) PT

(WxD): 100x160mm / 3.94x 6.30 inch

Dimensions mechanical rear panel PT

103x44 mm/4.06x 6.30 inch

Enviromental characteristics, operating

Ambient temperature if plugged to RUB series 1
frame: +5°C to +40°C,
relative humidity: 20-80% non-condensing

Enviromental non-operating

Temperature:-30°C to +70°C, relative humidity:5%-95% non-condensing

Altitude

Operating at 3000m / 10.000ft maximum

Product ordering ID: RUB 3 PT

Module description PT

Power supply for H3 housing

Functional description PT

60 W power supply

We reserve the right to modify specifications without notice.