The RUB T1 offers all the features and interconnectivity of H1 housing except it is designed for a siingle module only.
- The RUB T1 offers all the features and interconnectivity of H1 housing except it is designed for a siingle module only.
- RUBIDIUM SERIES 1 is a modular system which offers flexibility to its users.
- The T1 frame designed to house up to 1 module in desktop configuration.
- I/P & O/P connectors are a standard and part of the module.
- There is a uniform front which offers a see-through window for four status LED's and cut-outs for 4 keys and an identification button for each module.
- The controller status is available over TC_link (if an microprocessor based module - like all generator / inserter modules - is in the same frame) and the failure relay.
- All four versions of RUB frames can be interconnected (via standard RLC connector, see reverse) with all other RUB housing formats and therefore enable easy data exchange between modules and easy upgrade options, for possible additionally required modules.
- The fail signals are produced by a relay contact. Normally a contact closer indicates a breakdown or programmed failure occurance.
- The relays of all modules are in parallel operation. Each module and T1 housings are equipped with their own relay.
- The slot of the frame only differ by its individual, hard wired address and each frame has a an ID address.
- Module can individually be configured (e.g. the time code and video modules, except the power supply modules), can be located by their addresses.
- The PC connector (USB) at the rear of the frame provides an interface for the module configuration using Plura configuration software Each module can be addressed and can receive a user selectable configuration.
Product ordering ID: RUB T1 Module description Desktop Housing